Skip to content
Free pilot now open to trade contractors.Request access
Walkthrough to estimate · for the trades

Walk the job.
Price it on the spot.

Record the walkthrough on your phone or a video call, tap prices from your own price book as you go, and leave with a clear report and a draft estimate, ready for Housecall Pro, Jobber or ServiceTitan.

  • Your prices, never invented ones
  • Keeps recording with no signal
  • Nothing reaches the customer until you send it
REC 12:47 Finish
Added GFCI receptacle Undo
$1,3154 items GFCI receptacle 20 A circuit
Report ready 12 key moments
  1. Customer wants brighter task lighting over the bench
  2. Panel has space for one new 20 A circuit
  3. Outlet near the utility sink is not GFCI

GFCI protection likely required verify locally

Draft estimate
  • LED task light × 2From the field$480
  • 20 A circuit, up to 25 ftFrom the field$650
  • GFCI receptacleAI suggested$185
Total $1,315 Send to Housecall Pro
Illustration with sample data
Built for
  • Electrical
  • HVAC
  • Plumbing
  • Roofing
  • Remodeling
  • Solar
Sends to
  • Housecall Pro
  • Jobber
  • ServiceTitan
  • CSV
Two ways to walk the job

In the driveway or from the office.

Pick the one your team needs, or get both for a little more.

On-site

Walk the property with just your phone.

  • Continuous audio that survives dead zones and phone calls
  • Tap for a key photo, hold for a short clip
  • Live notes and one-tap prices while you talk
Explore On-site

Remote

See the job without the drive.

  • Your customer joins from a private link, no app
  • Snapshots and markup while you guide the camera
  • Recorded and transcribed for the report
Explore Remote
What you get

Everything between the walkthrough and the estimate.

Price as you go

Star your common services and tap them while you walk. Running total, undo and quantities, all from your own price book.

Live notes while you talk

About every minute: the scope you heard, what the customer wants, open questions and the photos you still need.

A report with key moments

Every request, measurement and decision on one timeline, matched to the photos taken at that moment.

Code and safety check

Flags requirements that may have been missed, with suggested code references to verify. A second look, not an inspection.

Estimate drafts you own

The draft starts from your field prices and AI adds only what is missing. Unmatched work stays unpriced for your review.

Send it where you work

Preview exactly what will be written, then send to Housecall Pro, Jobber or ServiceTitan, or download a CSV.

Price as you go

Leave the driveway with a number.

Your most-used services sit right over the camera. Every tap lands on the recording, so the report shows what you saw when you priced it, and the estimate draft starts from those lines.

  • Quick buttons from your own price book, with undo
  • Search the whole book or type a custom line
  • Saved on the phone first, so a dead zone loses nothing
Field prices$1,315
LED task lightTapped at 03:12× 2$480
20 A circuit, up to 25 ftTapped at 05:58× 1$650
GFCI receptacleTapped at 09:20× 1$185

Sample data

The report

A report your office can actually use.

Finish the walkthrough and ScopeRoam puts the whole conversation on one timeline: what the customer asked for, what you said, what was measured and what still needs checking, each with its photos.

  • Key moments with the photos taken right then
  • Code and safety notes to verify, with estimate impact
  • “Also noticed” items you can add with one tap
Garage workshop upgradeReport ready
Customer requestBrighter task lighting over the bench
MeasurementAbout 22 ft from the panel to the bench wall
ConditionUtility-sink outlet is not GFCI protected
GFCI protection likely required. Verify locally.

Sample data

How it works

From first look to sent estimate in four steps.

  1. 1

    Start

    Pick the customer from your field-service system, or type them in. One tap opens the camera.

  2. 2

    Walk

    Talk the job through. Snap photos, hold for a clip and tap prices as you go.

  3. 3

    Review

    Get the report and a draft estimate in minutes. Edit anything; nothing is final until you say so.

  4. 4

    Send

    Preview, then send to your field-service system or download the PDF and CSV.

Integrations

Fits the tools that already run your business.

Find the customer in your field-service system when you start, and send the reviewed estimate back when you finish. Every send shows a preview first.

How the integrations work
Pilot

Housecall Pro

Update an existing estimate or create a new one.

Beta

Jobber

Send the estimate as a new quote.

Beta

ServiceTitan

Add an estimate, notes and the PDF to the job.

Any system

Everything else

Download estimates as CSV; import your price book.

Pricing

Pick one product or both.

Monthly plans with credits that cover the walkthrough, the recording and the AI report. Free trial by invitation, no card to start.

Starter

$99/ month for one product

$129 / month for both

For a small team getting every estimate on record.

Business

$399/ month for one product

$479 / month for both

For multiple estimators and high volume.

Questions

Good to know.

More answers in the help center.

Do my customers need an app or an account?

No. For a video walkthrough they open a private, expiring link in their phone's browser. For an in-person walkthrough they don't need anything.

Does ScopeRoam make up prices?

No. Prices come from your price book or what you type. Work that doesn't match your price book stays unpriced for your office to set.

What happens in a basement with no signal?

Recording keeps going and saves on the phone first. Audio, photos and price taps upload on their own when the signal returns.

Is the code and safety check an inspection?

No. It points out things worth checking, with paraphrased code references to verify against your local adopted codes.

Can I keep using Housecall Pro, Jobber or ServiceTitan?

Yes. Your field-service system stays in charge. ScopeRoam finds the customer there and sends the reviewed estimate back.

Run your next walkthrough with ScopeRoam.

Request a free trial for your company, or try the demo with a sample job first. No card to start.